A firmware update should only be done if recommended by StarTech.com

The below steps should only be performed by advanced users. Please contact StarTech.com technical support for assistance.

1. Format a blank hard drive with a fat32 partition (To do this you can run the "5.3.2 Create Update HDD" task in the device menu)
2. Download the firmware file from the StarTech.com website and place the file on the main directory of the new partition
3. Connect the hard drive to the source port of the SATDUP11IMG
4. Using the navigation buttons locate "5.2.1 Update BIOS" and press ok

The update will take place, and the on screen display will alert you upon completion.
