Additional Features
1. All the 4 output ports output at the same time (previously outputted one by one)
2. Added PIP mode 
3. Added quad mode 
4. Added input label 
5. Added output picture aspect ratio adjustment 
6. Added HDCP management 
7. New WebGUI design 

How-to Install
1. Leave the power disconnected from the unit
2. Connect a mini usb cable to the back of the unit, with the other end going to your computer
3. Connect power to the unit.
4. You should now see a new usb drive connected to your machine
5. Open the drive and place the .bin file in the root of the drive
6. Unplug the mini usb connection from the back of the unit.
7. Remove power from the unit and reconnect it after a few seconds
8. Press the menu button, and go down to "Information". You should now see the new firmware version number listed