1. Format the USB drive in FAT32, a drive 8G's or smaller is recommended
2. Copy the 2 files (cvw_rx_firmware, cvw_tx_firmware) to the root of the usb drive
3. Connect the usb drive to the device using a usb to mini usb cable (e.g. USBMUSBFM1) and connect this to either the transmitter or receiver.
4. power on the device and you should see the following sequence of lights

Red light Solid
Blue light Solid
Blue light blink 3 times
Blue light off
Red light Solid

5. Once this is done you should see the lights return to normal.
6. Repeat steps 3 and 4 with the opposite Device.